Yomenie merch guide · yomenie.us/brand/merch-guideSheet 1 of 11
Brand · Open merch
Merch guide
Where each design from the open merch pack goes on a T-shirt, hoodie, tote, mug, bottle, sticker and pin, how big, and what to send the printer. One sheet per product, then how to make a mock-up and an ordering checklist.
Print this page or save it as a PDF from your browser’s print menu. Each product prints on its own A4 or Letter page.
The sizes and positions are typical industry placements for an adult M–L, not a template: always check them against your printer’s own template before you order. The diagrams are to scale; each has a scale bar.
The designs
01 Humans and agents
At least 7.5 cm (3 in) · flat colour02 Whole team
At least 7.5 cm (3 in) · flat colour03 Walk up
At least 7.5 cm (3 in) · flat colour04 Small team
At least 7.5 cm (3 in) · flat colour05 Stacked logo
At least 10 cm (4 in) · full colour06 Floor map
At least 7.5 cm (3 in) · flat colour07 Agent badge
At least 12 cm (5 in) · flat colour08 Dictionary
At least 7.5 cm (3 in) · flat colour
01, 02, 03, 04, 06, 07 and 08 are flat colours: screen print, embroidery, vinyl or DTG. 05 is the full-colour logo: DTG, DTF or digital print. Light files go on white, heather grey, natural or cream and office floor (sand); dark files on black or ink, navy and violet night. Not on amber, red, bright blue or other strong colours: use the brand kit's one-colour mark in ink or white there.
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 2 of 11
T-shirt
Four spots: a big print on the front or back, a small one on the left chest, and the sleeve.
Front 25–30 cm (9.8–11.8 in) wide
- Where
- Centred, top edge 7–9 cm (2.8–3.5 in) below the collar.
- Fits
- All eight designs
Left chest 8–10 cm (3.1–3.9 in) wide
- Where
- On the wearer’s left, centred about 10 cm from the middle, top edge 7–9 cm below the collar.
- Fits
- Designs 01, 02, 03, 04, 06 and 08; 05 (only at the full 10 cm); the ink mark and the white mark (embroidery)
- Not here
- 07: needs 12 cm (5 in)
Back 25–30 cm (9.8–11.8 in) wide
- Where
- Centred, top edge 10–12 cm (3.9–4.7 in) below the collar.
- Fits
- All eight designs
Sleeve 7–8 cm (2.8–3.1 in) wide
- Where
- Centred on the outside of the sleeve, bottom edge 3–4 cm above the hem.
- Fits
- The ink mark, the white mark, the wordmark and the white wordmark; the full-colour mark (DTG)
- Not here
- 01, 02, 03, 04, 06 and 08: slogans read too small on a sleeve. Use the mark or the wordmark. 05: needs 10 cm (4 in). 07: needs 12 cm (5 in)
- File to send
- The SVG of the light or dark version that matches the garment, with the PNG as a backup. Brand-kit files are at yomenie.us/brand#downloads.
- Colours that work
- Light files: white, heather grey, natural or cream and office floor (sand). Dark files: black or ink, navy and violet night. Not on amber, red, bright blue or other strong colours: use the brand kit's one-colour mark in ink or white there.
- Print method
- Screen print or DTG for the front and back. Embroidery suits the left chest and the sleeve. 01, 02, 03, 04, 06, 07 and 08 are flat colour; 05 is full colour.
- Notes
- For embroidery, ask for a sew-out (a stitched sample) before the run.
- Sizes are for an adult M–L. On XS–S or XXL and up, ask whether the printer scales the print.
Typical sizes: check your printer’s template.T-shirt
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 3 of 11
Recommended tees
Five T-shirts, each with a front and a back print, in light and dark versions. Files: tees/<n>-<slug>-<front|back>-<light|dark>.svg in the merch pack, PNG as a backup.

Front 25–28 cm (9.8–11 in) wide
Centred, top edge 7–9 cm below the collar, as the T-shirt sheet’s front print.
Back 20–25 cm (7.9–9.8 in) wide
Centred, top edge 10–12 cm below the collar. Tee 5’s pixel crew: print it as it is, never smoothed.
- 1 Assemble your fellowship. Back: the arch and “Humans and agents, one floor.” · Shown on white: 1-fellowship-front-light
- 2 The gathering has begun. Back: the arch and “Yomenie: a gathering. yomenie.us” · Shown on ink: 2-gathering-front-dark
- 3 I used to move tickets for a living. Back: “Now my agents do. yomenie.us” · Shown on heather grey: 3-tickets-front-light
- 4 Copy, paste, update the ticket. Never again. Back: the arch and “Built by few. Run by many.” · Shown on ink: 4-never-again-front-dark
- 5 Walk up, don’t schedule. Back: the pixel crew and “Humans and agents, one floor.” · Shown on white: 5-walk-up-front-light
Light files on white, heather grey or natural shirts; dark files on black, ink, navy or violet night. Violet appears only on the agents in tee 5’s crew.
Typical sizes: check your printer’s template.Recommended tees
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 4 of 11
Hoodie
The front print sits above the pocket and below the drawstrings. The back starts below the hood.
Front, above the pocket 23–25 cm (9.1–9.8 in) wide
- Where
- Centred, top edge 8–10 cm (3.1–3.9 in) below the neckline, at least 3 cm clear of the pocket.
- Fits
- All eight designs
Left chest 8–10 cm (3.1–3.9 in) wide
- Where
- On the wearer’s left, centred about 10 cm from the middle, top edge 7–9 cm below the neckline.
- Fits
- Designs 01, 02, 03, 04, 06 and 08; 05 (only at the full 10 cm); the ink mark and the white mark (embroidery)
- Not here
- 07: needs 12 cm (5 in)
Back 25–30 cm (9.8–11.8 in) wide
- Where
- Centred, top edge 12–15 cm below the hood seam, so the hood doesn’t cover it when it’s down.
- Fits
- All eight designs
- File to send
- The SVG of the light or dark version that matches the garment, with the PNG as a backup. Brand-kit files are at yomenie.us/brand#downloads.
- Colours that work
- Light files: white, heather grey, natural or cream and office floor (sand). Dark files: black or ink, navy and violet night. Not on amber, red, bright blue or other strong colours: use the brand kit's one-colour mark in ink or white there.
- Print method
- Screen print or DTF for the front and back (ask which the printer prefers on fleece). Embroidery suits the left chest. 01, 02, 03, 04, 06, 07 and 08 are flat colour; 05 is full colour.
- Notes
- The drawstrings hang over the top of the front print, so keep it 8 cm or more below the neckline.
- For embroidery, ask for a sew-out before the run.
Typical sizes: check your printer’s template.Hoodie
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 5 of 11
Tote bag
One print on the front of a standard 38 × 42 cm canvas tote.
Front 25 cm (9.8 in) wide
- Where
- Centred, top edge about 8 cm (3.1 in) below the top of the bag.
- Fits
- All eight designs
- File to send
- The SVG of the light or dark version that matches the garment, with the PNG as a backup. Brand-kit files are at yomenie.us/brand#downloads.
- Colours that work
- Light files: white, heather grey, natural or cream and office floor (sand). Dark files: black or ink, navy and violet night. Not on amber, red, bright blue or other strong colours: use the brand kit's one-colour mark in ink or white there.
- Print method
- Screen print is usual on canvas; DTG works on cotton totes. 01, 02, 03, 04, 06, 07 and 08 are flat colour; 05 is full colour.
- Notes
- Canvas is coarse. Ask for a proof of 06 (the floor map) and other thin lines before a run.
- Print the back the same way, or leave it plain.
Typical sizes: check your printer’s template.Tote bag
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 6 of 11
Mug, 11 oz
Drawn unrolled: an 11 oz mug is about 25.8 cm around and 9.5 cm tall, with the handle at both ends of the drawing.
One side 8 cm (3.1 in) wide
- Where
- On one side, 1.5–2 cm from the handle, centred top to bottom. Many printers print both sides the same.
- Fits
- Designs 01, 02, 03, 04, 06 and 08; the full-colour mark
- Not here
- 05: needs 10 cm (4 in). 07: needs 12 cm (5 in)
Full wrap 20 cm (7.9 in) × 8.5 cm (3.3 in) wide
- Where
- Centred opposite the handle, 1–2 cm clear of it on each side, 5 mm from the rim and the base.
- Fits
- 01, 02, 03, 04, 06 and 08 (two side by side); the wordmark and the white wordmark
- Not here
- 05: needs 10 cm (4 in). 07: needs 12 cm (5 in)
- File to send
- The SVG of the light or dark version that matches the ground, with the PNG as a backup. Brand-kit files are at yomenie.us/brand#downloads.
- Colours that work
- White or light mugs take the light files; black mugs the dark files.
- Print method
- Sublimation on white or light-coated mugs (full colour, any design). Black mugs take a UV or ceramic print. 01, 02, 03, 04, 06, 07 and 08 are flat colour; 05 is full colour.
- Notes
- Wrap art: leave at least 1 cm clear of the handle.
- 05 and 07 need 10 and 12 cm, more than a mug is tall: use the mark or the wordmark instead.
Typical sizes: check your printer’s template.Mug, 11 oz
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 7 of 11
Water bottle
A 750 ml bottle is about 7.3 cm across, so the print is small: the logo, not a slogan design.
Front 6–7 cm (2.4–2.8 in) wide
- Where
- Centred on the side facing out, top edge about 5 cm below the shoulder.
- Fits
- The full-colour mark, the white mark, the wordmark and the white wordmark; the ink mark (engraving)
- Not here
- 01, 02, 03, 04, 06 and 08: needs 7.5 cm (3 in). 05: needs 10 cm (4 in). 07: needs 12 cm (5 in)
- File to send
- The SVG of the light or dark version that matches the ground, with the PNG as a backup. Brand-kit files are at yomenie.us/brand#downloads.
- Colours that work
- Light bottles and plain steel take the full-colour or ink mark; black bottles the white mark.
- Print method
- UV print (full colour) or screen print. Laser engraving takes the one-colour mark. 01, 02, 03, 04, 06, 07 and 08 are flat colour; 05 is full colour.
- Notes
- The width is measured flat. On the bottle it wraps around the curve, so it looks a little narrower from the front.
- The horizontal logo needs 10 cm, more than the bottle has: use the mark or the wordmark.
Typical sizes: check your printer’s template.Water bottle
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 8 of 11
Stickers
Die-cut stickers follow the shape of the art. Round stickers are too small for a square design, so they carry the mark.
Die-cut 7.5 cm (3 in) wide
- Where
- The art 7.5 cm (3 in) wide, the cut line about 3 mm outside it.
- Fits
- Designs 01, 02, 03, 04, 06 and 08
- Not here
- 05: needs 10 cm (4 in). 07: needs 12 cm (5 in)
- Note
- 05 and 07 work as 10 cm and 12 cm die-cut stickers.
Round 5–7.5 cm (2–3 in) wide
- Where
- 5–7.5 cm across, the art inside a circle 3 mm in from the edge.
- Fits
- The full-colour mark (at 5 cm the arch is at its 25 mm minimum); the app icon and the ink mark
- Not here
- 01, 02, 03, 04, 06 and 08: a square design doesn’t fit a circle this small. Use the mark or the app icon. 05: needs 10 cm (4 in). 07: needs 12 cm (5 in)
The laptop set
1 App icon (50 × 50 mm) · 2 Stacked logo (70 × 47 mm) · 3 Agent badge (87 × 102 mm) · 4 Humans and agents (80 × 59 mm) · 5 Walk up (75 × 51 mm) · 6 Small team (70 × 66 mm) · 7 Dictionary (72 × 44 mm) · 8 Priya (47 × 60 mm) · 9 Iris, an agent (47 × 60 mm). Files stickers/1-app-icon.svg and so on, each with its cut line.
- File to send
- The SVG of the light or dark version that matches the ground, with the PNG as a backup. Brand-kit files are at yomenie.us/brand#downloads.
- Colours that work
- White or cream vinyl takes the light files; black vinyl the dark files.
- Print method
- Digital print on vinyl: full colour, so every design works, 05 included. 01, 02, 03, 04, 06, 07 and 08 are flat colour; 05 is full colour.
- Notes
- For laptops: vinyl with a matte or gloss laminate, 5–8 cm across. The ready-made laptop set is listed on this sheet and at yomenie.us/brand#stickers.
- Die-cut cuts through the backing paper to the sticker’s shape; kiss-cut cuts only the vinyl and leaves a square backing that’s easier to peel.
- Send the cut line as its own path (the laptop set’s files have one named CutContour) and ask for a proof that shows it.
- On clear vinyl, the surface behind it is the ground: pick the light or dark file for that.
Typical sizes: check your printer’s template.Stickers
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 9 of 11
Enamel pin
Pins are 25–32 mm, far below any slogan design’s minimum. Use the app icon or the one-colour mark, never a slogan.
Tile pin 25–32 mm (1–1.3 in) wide
- Where
- The pin is the tile: its shape and the arch on it.
- Fits
- The app icon
- Not here
- 01, 02, 03, 04, 06 and 08: needs 7.5 cm (3 in). 05: needs 10 cm (4 in). 07: needs 12 cm (5 in)
Round pin 25–32 mm (1–1.3 in) wide
- Where
- The one-colour mark in one enamel colour inside a 2 mm gold rim.
- Fits
- The ink mark and the white mark
- Not here
- 01, 02, 03, 04, 06 and 08: needs 7.5 cm (3 in). 05: needs 10 cm (4 in). 07: needs 12 cm (5 in)
- File to send
- The SVG of the light or dark version that matches the ground, with the PNG as a backup. Brand-kit files are at yomenie.us/brand#downloads.
- Colours that work
- Gold metal lines; violet, gold and cream enamel for the tile, one colour for the mark.
- Print method
- Hard enamel on gold-plated metal (soft enamel works too). 01, 02, 03, 04, 06, 07 and 08 are flat colour; 05 is full colour.
- Notes
- The tile’s gradients become flat enamel colours. Check the maker’s digital proof, and that the arch’s outline isn’t simplified away.
- Never a slogan on a pin: the type would be about 2 mm tall.
Typical sizes: check your printer’s template.Enamel pin
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 10 of 11
Make a mock-up
A mock-up shows the design on the product before anything is printed. Use the real files: never a redrawn copy.
Route A: the printer’s template (recommended)
- Download the PNG of the light or dark version that matches the product colour.
- Open the printer’s or vendor’s product template or mock-up tool.
- Place the PNG at the size and position from the product’s sheet in this guide.
- Export the vendor’s mock-up. It shows what they will actually print.
Route B: an image model, then our real file
Image models redraw logos and misspell text, so never ask one to draw the Yomenie logo or a slogan. Generate a blank product, then place our real PNG on it yourself in Figma, Photoshop or a similar tool, on a blank-garment render.
- Generate a blank product photo or flat-lay with the prompt below.
- Place our PNG on the print area at the size from the product’s sheet.
- Check the result against the list below before you share it.
Prompt for a blank product photo
Product photo of a blank heather-grey pullover hoodie on a wooden hanger, front view, against a plain warm-white wall. Soft studio light, gentle shadows, the whole hoodie in frame, no person. Leave the front print area (the chest, above the pocket) completely empty: plain fabric, no text, no letters, no logos, no symbols and no graphics anywhere in the image. If I attach artwork, reproduce it exactly as supplied: the same shapes, colours, letters and proportions. Do not redraw, retype, restyle or recolour it. Never draw the Yomenie logo, arch or wordmark yourself, and never change, shorten or translate a slogan.
For a flat-lay, replace the first paragraph with: “Flat-lay photo of a blank white crew-neck T-shirt on a light oak table, shot from straight above, soft daylight, the whole shirt in frame, nothing else on the table.” Select the text to copy it.
Check before you share
- Only the official arch and wordmark, from the files. Nothing retyped.
- Colours unchanged.
- Violet only on the agent designs (01, 02, 06 and 07).
- Clear space around the logo: one column width of the arch on every side.
- Minimum sizes respected (this guide and the brand page).
- Labelled “Mock-up”.
- Where the artwork is shared, the CC BY 4.0 credit “Yomenie (yomenie.us)”.
Use the real files, never a redrawn copy.Make a mock-up
Yomenie merch guide · yomenie.us/brand/merch-guideSheet 11 of 11
Ordering checklist
- Send the SVGs: every word is outlined, so the printer needs no fonts. Add the PNGs as a backup.
- Ask for a physical proof (a sample, or a photo of a real print) and match it to the hex values on yomenie.us/brand. The CMYK values there are approximate.
- Choose the garment colour to match the file: the light file on light garments, the dark file on dark ones.
- Check the size and position of each print against this guide and the printer’s template, and that nothing is below its minimum size.
- If you sell or share the merch or the artwork, credit “Yomenie (yomenie.us)”, as the CC BY 4.0 licence asks.
- The Yomenie name and logo are trademarks. You may use them to make merch about Yomenie, but not to suggest that Yomenie made, endorses or sells your product.
Minimum sizes of the logo
- Full-colour arch: at least 25 mm tall.
- One-colour mark: at least 10 mm tall (embroidered 15 mm).
- Horizontal logo: at least 100 mm wide (the arch 25 mm tall).
- Wordmark: at least 30 mm wide.
- App icon: at least 8 mm.
Garment colours
- White #FFFFFF · light file
- Heather grey #D5D6D2 · light file
- Natural or cream #F4ECDD · light file
- Office floor (sand) #EADFCB · light file
- Black or ink #15161B · dark file
- Navy #1F2A44 · dark file
- Violet night #1E1438 · dark file
Licence. The artwork in the merch pack is licensed under Creative Commons Attribution 4.0 International (CC BY 4.0). Credit “Yomenie (yomenie.us)”.
Questions about merch: yomenie.us/brandOrdering checklist